A new siding installation will transform the look and feel of your home. Before making the investment, Bel-Aire Home Improvement in Platteville, WI, suggests inspecting your existing exterior to see if it needs replacing. The following characteristics will boost your confidence that these services are the right choice. 

What You Should Look for Before Buying Siding

1. Ripples

If you notice ripples or waves in the longer runs of siding, it means that piece was either cut to the wrong length or fastened too tightly to the wall. Either could indicate a problem with trapped heat or moisture. Siding should lay evenly, which allows room for air to escape.

2. Shrinking or Missing Caulk

Caulking should be thorough and in good condition. Otherwise, there is a good chance moisture can penetrate the siding and damage the structure of your house.

3. Rusted Nails

Nails used in siding should be galvanized to prevent rusting. If you notice unsightly rust stains leading from the nail holes, you know the siding installers used the wrong type. A new installation will increase the curb appeal of your property significantly. 

4. Cracked or Loose Panels

A single loose or cracked panel is no cause for concern, since high winds and whipping tree branches can damage even the most skillfully installed siding. However, if you notice a whole section of loose or cracked panels, you can be sure they were not installed properly and must be replaced.

To discuss your siding options with an experienced professional, contact Bel-Aire Home Improvement, the leading installer of roofing, siding, insulation, and gutters in Platteville, WI. They serve the entire Tri-state area and offer 24/7 emergency service. Call (608) 348-­2381 to schedule a consultation or visit their website to submit a contact request form. Like them on Facebook for more tips and company news.